���ϳԹ���

Finish Line Citrus Degreaser. Super strong and fast. Cuts through the toughest of carbonized grit, grease, and grime. Low surface tension for thorough penetration into all areas. 100% active, biodegradable and nontoxic.

Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant

E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air

Finish Line's Gear Floss is the ultimate detailing tool, perfect for cleaning your cassette, chainrings, derailleur pulleys, hubs and all those hard-to-reach nooks and crannies. Made with microfiber, it works by attracting and capturing dirt, grease and particles inside its star-shaped grooves. Each package has 20, 20-inch-long ropes that are washable and reusable.

HALO® WAX chain lubricant is expertly engineered to deliver unparalleled drivetrain performance by reducing friction and wear caused by abrasive contaminants, delivering long-lasting lubrication. Designed for dry and dirty conditions, this advanced formula ensures maximum chain cleanliness, making it ideal for cyclists seeking top performance. Developed in a state-of-the-art laboratory and field-tested by leading professional teams, HALO® WAX applies as a liquid and dries to a durable wax coating that is completely dry-to-the-touch, providing a clean and efficient drivetrain. Each bottle of HALO® WAX comes with Finish Line’s innovative patent-pending Smart Luber™. This advanced applicator delivers precise lubrication, ensuring every chain link is covered without the mess and waste of traditional methods. The Smart Luber™ revolutionizes the way lubricants are applied, saving time and eliminating waste by ensuring no link is missed, no excess is spilled, and no performance is compromised. HALO® WAX and the Smart Luber™ offer cyclists an easy, efficient way to maintain optimal drivetrain performance and cleanliness.

HALO® WET chain lubricant is expertly engineered to deliver unparalleled drivetrain performance and extended relubrication intervals in both clean/dry and wet conditions. Designed using advanced laboratory-developed chemistries and rigorously field-tested by top professional teams, HALO® WET ensures ultra-low friction, superior mileage, and ultimate water and rust resistance. This high-performance liquid formula is easy to apply, goes on wet, and is ready to ride immediately, providing cyclists with reliable lubrication for any weather or terrain. Each bottle of HALO® WET comes with Finish Line’s innovative patent-pending Smart Luber™. This advanced applicator delivers precise lubrication, ensuring every chain link is covered without the mess and waste of traditional methods. The Smart Luber™ revolutionizes the way lubricants are applied, saving time and eliminating waste by ensuring no link is missed, no excess is spilled, and no performance is compromised. HALO® WET and the Smart Luber™ offer cyclists an easy, efficient way to maintain optimal drivetrain performance and cleanliness.

Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Rated "5 Chainrings, Exceptional Grease" by Bicycling Magazine, it's very slick and very tough and lasts as much as 5 times longer than petroleum grease.

Finish Line's ���ϳԹ��� Quality Chain Cleaner Kit is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning. Your hands stay clean, too! Plus, its rugged plastic construction is virtually unbreakable and the kit comes complete with a 4-ounce bottle of EcoTech Degreaser concentrate and a 2-ounce bottle of Dry lube. Use it for a cleaner and smoother-shifting chain.

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

Our Classic LITE chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. "Riding in" forms an extremely low-friction plating. Plating bonds to chain; can't be washed off! Components stay cleaner, last longer, and run quieter. Extremely durable and outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Lite BCL is less concentrated for easier application and optimum performance. We recommend the Lite Bicycle Chain Lube for road bikes. You can confidently use Dumonde Tech's Bicycle Chain Lubes on all cables, pivots points, and seals. Safe on plastic, rubber and all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in extreme cold conditions.

The Classic MR GREASE with our "Micro Resistance Polymer" technology provides the ultimate protection and performance for bearings and suspension forks. MR Grease polymerizes to the surfaces leaving a barrier of grease that reduces wear, provided corrosion protection, and is waterproof. MR Grease is carbon fiber safe. Our Classic Liquid Grease can be used to thin MR Grease to create a lighter weight viscosity if desired.

Our Classic ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. - “Riding in” forms an extremely low-friction plating. - Plating bonds to chain; can’t be washed off! - Components stay cleaner, last longer, and run quieter. - Extremely durable, outlasts all other chain lubes! - Environmentally sensitive and saves money. - To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bikes, cyclo-cross, and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, and seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions..

Dumonde Tech’s Classic Liquid Grease is a high-performance replacement for traditional viscosity grease. Liquid Grease reduces the coefficient of friction through Polymer Technology. Liquid Grease polymerizes and bonds to the surface providing extremely low drag. Liquid Grease is attracted to heat to provide lubrication at critical locations. Highly recommended for steel and ceramic cartridge bearing. Eliminates drag that grease-packed bearing experience for a drag-free bearing, even in the freezing temperatures. Ideal for suspension fork legs, full suspension pivots, wheel bearings, and roller bearing. A proven application for spoke nipple and rim interface. Can be used as a chain lube for very extreme muddy conditions of mountain bike and cyclocross.

Contains the fittings and syringes needed for bleeding Campagnolo disc brakes -Does not include mineral oil - Fits Brand: Campagnolo - Hydraulic Fluid Type: Mineral Oil

- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air

Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Professional Disc Brake Bleed Kit has everything you need to keep your Avid Juicy, Code or Elixir hydraulic discs running strong. And, this pro version is designed to stand up to heavy use with high-volume syringes and steel fittings.

- The wrench is used to remove and install Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, Race Face, FSA, SRAM, Truvativ, Chris King bottom brackets - Small wrench is included for removal and installation of Shimano plastic bolts that are used on the Hollowtech II cranksets - Material: premium flex plus carbon steel, Surface finish: chrome plated according to ISO1456:2009

- Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. - In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.

- 3/32" chain whip

- The crank puller is designed to remove standard square spindle cranks. With help of the included adaptor other standards such as ISIS and Octalink cranks can also be removed.

- Crank Saver—Pedal thread repair and insert kit - Includes: left and right reaming tap 5/8x24 TPI, 10 pedal thread inserts for left crank arm, 10 pedal thread inserts for right crank arm, metal box with cut out SOS foam trays.

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool - Flat screwdriver 1.0 x 5.0 - Spoke Key 3.3, 3.45 and DT

- Foldable and precise tool, used for re-aligning rear derailleur hangers and maintaining precise gear shifting - Compatible with all wheel sizes from 20? to 29?+ and screws directly into rear derailleur hanger threads - Precise measuring gauge can be locked in place, so you don´t lose you measurement when you push it against the wheel in different positions

- Master link pliers are for commonly used chains with master link, SRAM Powerlink or the KMC Missing Link

- Pedal thread inserts are used to replace damaged threads in cranks

- 15 mm opening is laser cut with precision and perfect angle to help you loosen the pedals as easy as possible - 270mm of length for extra leverage - Small and light weight, perfect for toolbox and traveling

- The simple tightening of the spindle fits the chain pin with perfect precision and with its ergonomic design it is easy to use.